03 Home Clean House.jpg


(425) 475-2715

How to Wash Your Windows With a Power Washer in Washington

Are you looking for an efficient way to clean your windows and boost your home’s curb appeal? Power washing can be a powerful solution, especially in Washington where the mix of rain and sun can leave windows looking less than their best. In this guide, brought to you by Triple Clean Power Washing, we’ll walk you through the steps to effectively and safely power wash your windows, ensuring a sparkling finish without the risk of damage. We serve various areas including Arlington, Everett, and Marysville, bringing expertise directly to your doorstep!

Key Takeaways:

  • Power washing windows is effective but requires proper preparation and technique.
  • Using the right nozzle and settings is crucial to avoid damage.
  • Always start from the top and use the right cleaning solutions designed for power washing.

Step 1: Prep Yourself and the Area

Before you begin the cleaning process, it’s crucial to ensure both your safety and the protection of the area around your windows. Wear protective eyewear and durable gloves to safeguard against any accidental sprays or spills from the cleaning solutions, which can be quite harsh. Clear the area around the windows of any movable objects like furniture or outdoor decor to prevent damage and make access easier. Additionally, cover any plants or delicate landscaping with tarps to shield them from potential harm caused by detergents or the powerful spray. This preparation step is not just about making cleaning easier; it’s about ensuring a safe and damage-free cleaning environment.

  • Safety Gear: Always wear protective eyewear and durable gloves to protect against the high-pressure water and cleaning chemicals.

  • Clear the Area: Remove any movable objects such as outdoor furniture, pots, and decorative items to prevent damage and facilitate easier access to the windows.

  • Protect Landscaping: Cover plants and landscaping with tarps to protect them from the effects of detergents and the force of the water spray.

  • Safety First: These steps ensure a safe environment, preventing injuries and damage to property during the cleaning process.

Step 2: Check All Windows

Thoroughly inspect each window for any signs of damage such as cracks in the glass or deteriorating seals. Washing windows with existing damage using high pressure can exacerbate these issues, potentially leading to costly repairs from water entering your home. If you identify any problems, it’s advisable to repair these windows before washing or to use a low-pressure setting to clean them gently. This careful inspection is essential to prevent water damage to your home’s interior, which can be a severe and expensive consequence of neglecting this step.

Step 3: Add Cleaning Solution

Select a cleaning solution that is specifically designed for use in power washers and is safe for both glass and window frames. This specialized cleaner will help to effectively loosen and remove dirt, grime, and buildup without harming the window surfaces. For residents in areas like Snohomish or Lake Stevens where environmental factors can lead to significant buildup, using the right cleaner is crucial for effective cleaning. Apply the solution liberally to ensure all the dirt is sufficiently soaked, making it easier to wash away. This step not only ensures a thorough clean but also protects your windows from potential damage from inappropriate chemicals.

Step 4: Choose the Safest Nozzle and Setting

It’s important to select the appropriate nozzle and adjust your power washer to the correct setting to ensure effective cleaning without damaging your windows. A 40-degree white nozzle is generally recommended because it offers a good balance of cleaning power without being too harsh on the glass and frames. Adjust the pressure settings of your washer to a lower level to avoid any damage to the window structure, especially if the windows are older or have any vulnerabilities. This step ensures that you are cleaning effectively while preserving the integrity and longevity of your windows.

Step 5: Start from the Top

When you begin washing, always start from the top of the window and work your way down. This technique allows the water and cleaning solution to flow downwards, naturally following gravity, which helps prevent dirty water from dripping onto areas you have already cleaned. This method is particularly efficient for cleaning taller buildings or multi-story homes in areas like Seattle or Everett, ensuring that all dirt and debris are washed away effectively without the need for repeated cleaning. Starting from the top ensures a more streamlined and efficient cleaning process.

Step 6: Get the Position Right

When spraying your windows, maintain a safe distance—about two feet—and angle the water spray downwards. This approach helps prevent water from being driven behind the siding or into the window frame, which can cause moisture problems inside your walls. Correctly positioning the spray is crucial in ensuring that the water cleans effectively without accumulating in areas that could lead to water damage. This step is key to both effective cleaning and the long-term maintenance of your home’s exterior.

Step 7: Spray on Soap

Apply the soapy water using your power washer from the top of the window downwards, ensuring that the entire surface is covered. Allow the solution to sit on the windows for a few minutes to break down the dirt and grime effectively. However, it is important to ensure that the solution does not dry on the window as this can leave hard-to-remove streaks. This step is critical as it ensures that the soap has enough time to work on the grime, making the rinsing process much more effective.

Step 8: Rinse with Clear Water

Finally, rinse the windows with clean water, starting again from the top and working your way down to ensure that all the soap and loosened grime are washed away. Ensure that the water removes all traces of soap, as any residue left behind can dry and leave streaks, marring the appearance of your windows. This final rinse is crucial for achieving a clear, streak-free finish, leaving your windows sparkling clean and enhancing the overall beauty of your home.

Why Choose Triple Clean Power Washing?

At Triple Clean Power Washing, we understand the importance of maintaining a pristine appearance for your home or business. Our professional team is equipped with the expertise and the right tools to ensure your windows and other surfaces shine without compromising the integrity of your property. Here’s why you should consider us for your next cleaning project:

  • Professional Expertise: Our trained professionals use state-of-the-art equipment and techniques to deliver superior cleaning results. Whether it’s stubborn grime or delicate surfaces, we have the knowledge to handle it all.
  • Tailored Services: We offer a range of services tailored to meet the specific needs of your property. From residential homes to commercial buildings, we provide a thorough cleaning that revitalizes and protects.
  • Safety and Efficiency: We prioritize the safety of both our clients and our team. Our processes are designed to be safe for all types of properties and surfaces, ensuring efficient and effective cleaning without risks.
  • Local Experience: Serving various areas in Washington including Arlington, Everett, and Marysville, we bring local experience that understands the unique challenges posed by the Washington climate.

Ready to see the difference that professional power washing can make? Contact Triple Clean Power Washing today! We’re here to help with all your cleaning needs, ensuring that every job is done right the first time.

Whether you need routine maintenance or a one-time deep clean, trust Triple Clean Power Washing to deliver exceptional results that enhance your property’s appeal. Reach out today and let us transform your property with the power of clean!

FAQ: Washing Windows With a Power Washer

Always wear protective eyewear and durable gloves. The high-pressure spray can cause serious eye injuries and the chemicals used in cleaning solutions can be harsh on the skin.

Remove any movable objects like furniture and outdoor decor to avoid damage and make access easier. It’s also important to cover nearby plants and landscaping with tarps to protect them from the cleaning solutions and water pressure.

 Plants and landscaping can be sensitive to the chemicals found in cleaning solutions and may be damaged by the high pressure of the water spray. Covering them with tarps helps to prevent any potential harm.

If you find any damage, such as cracks in the glass or deteriorating seals, it’s best to repair these issues before proceeding with power washing. Washing damaged windows at high pressure can worsen the damage and potentially lead to water leaks inside your home.

Use a cleaner that is specifically designed for use with power washers and is safe for glass and window frames. These cleaners will effectively remove grime without damaging the surfaces.

Picture of Ivan Diaz
Ivan Diaz

I love seeing the smile of our clients when they see how clean we made their property. We always make sure your property is triple cleaned!

Leave a Reply

Your email address will not be published. Required fields are marked *